What is most important in managing energy consumption is the Low Heating Value of mixed fuel gas.
LHV and HHV
The lower heating value (LHV; net calorific value; NCV, or lower calorific value; LCV) is another measure of available thermal energy produced by a combustion of fuel, measured as a unit of energy per unit mass or volume of substance. In contrast to the HHV, the LHV considers energy losses such as the energy used to vaporize water - although its exact definition is not uniformly agreed upon. One definition is simply to subtract the heat of vaporization of the water from the higher heating value. This treats any H2O formed as a vapor. The energy required to vaporize the water therefore is not released as heat.
Python code for LHV
LHV calculations assume that the water component of a combustion process is in vapor state at the end of combustion, as opposed to the higher heating value (HHV).
The procedure for calculating the mixed fuel gas LHV is written in Python as follows.
dbHC = [# HC, MW, LHV
["H2", 2.016, 274.118],
["C1", 16.043, 909.456],
["C2", 30.07, 1618.49],
["C3", 44.097, 2316.935],
["C4", 58.124, 3013.306],
["C5", 72.151, 3708.849],
["C6", 86.178, 4405.639],
["C7", 100.205, 5102.429],
["C8", 114.232, 5799.22],
["C9", 128.259, 6496.066],
["C10", 142.285, 7192.913],
["O2", 32, 0],
["N2", 28.013, 0],
["CO2", 44.01, 0],
["CO", 28.011, 320.637],
["SO2", 64.063, 0],
["H2S", 34.076, 586.89],
["H2O", 18.015, 0],
]
def hclhv(Comp):
sumComp = sum(Comp)
for i in range(n):
Comp[i] = Comp[i] / sumComp
tmpLHV = 0
for i in range(n):
tmpLHV = tmpLHV + dbHC[i][2] * Comp[i]
sumComp = sum(Comp)
return tmpLHV / sumComp
Comp = [0,90,4,2,1,0,0,0,0,0,0,0,3,0,0,0,0,0]
print("Midex Fuel Gas LHV [Btu/Scf] = ", hclhv(Comp))
When run the code, you get the results below.
Midex Fuel Gas LHV [Btu/Scf] = 959.72176
No comments:
Post a Comment